Schneider Thermal-Magnetic Circuit Breakers

Schneider Circuit Breakers for Generator Sets

Circuit Breakers 4-pole (4 poles) from the line Multi 9 from Schneider Electric, for protecting electrical circuits in generator set installations. They protect against overloads and short circuits by automatically disconnecting the circuit in the event of excessive current. The four-pole configuration simultaneously covers all three phases and the neutral, making it suitable for three-phase installations. DIN rail mounting. Express shipping within 24–48 hours.

Circuit breakers available

All models: 4 poles · Curve B · 10 kA breaking capacity

10A – 16A – 20A – 25A – 32A – 40A – 50A – 63A

Remote-trigger coil

• MX-OF 100-415V C60N Coil: An accessory for the C60N series circuit breakers that allows the circuit breaker to be tripped remotely via an electrical signal. Useful for integration into generator set automation systems where the circuit needs to be disconnected remotely without manual intervention on the circuit breaker.

What intensity do I need?

The rating of the circuit breaker must be equal to or slightly higher than the rated current of the circuit it is designed to protect. Curve B is the most common for protecting resistive and lighting circuits, and the most common in generator set installations. If you have questions about which size is appropriate for your installation, contact us at.