• On sale!

    Voltage Regulator Mecc Alte DSR

    Save 5%


    Analogical remote control of output voltage is possible through external voltage (0÷2,5Vdc) or with a 10 Kohm linear potentiometer

    Underspeed protection with adjustable threshold and slope

    Overvoltage and undervoltage alarms

    Excitation overcurrent protection with delayed intervention

    Quantity :
    • Política de seguridad High quality 100% original products.
    • Delivery Policy Express shipping 24/48 hours
    • Return policy Check our return policy in detail
    Métodos de pago aceptados

    The DSR regulators are an advanced AVR regulator replacing the traditional automatic voltage regulator. This voltage regulator is fully digital controlled and is fitted as standard across all our ECO and ECP models.

    Connections on the DSR regulators are through 15 fast on / fast off connectors which speed up the connection process. This is especially useful if reconnecting a 12 wire machine to any specific voltage. This regulator is cross-compatible with all ECO and ECP machines and can be used as standard with the MAUX system and the PMG ma systems, so there’s never any need to change regulators. Its single phase sensing comes as standard.

    By means of the external communication board (DXR or DL1), computer connection (RS232 or USB) or PLC connection (RS485 via MODBUS) is available. This allows changes to the AVR settings, to monitor in real-time performances (Voltage, Frequency or DSR status), or to download the alarm report (Communication software is available from Mecc Alte).

    Variable voltage supply                40 ÷ 270 Vac

    Frequency range             15 Hz ÷ 72 Hz

    Precision of voltage regulation ± 1%

    Maximum continuous output current   5 Adc

    Environmental temperature      -25°C ÷ +70°C

    Regulation          True RMS or average measurement (70÷280 Vac)

    Transient power drops and overvoltage              within ± 15%

    Voltage recovery time  within ± 3% of the value set, in less than 300 msec

    Transient overvoltage during start up   less than 5% of nominal voltage

    Sensing                Single phase

    Parameters (can be programmed via software)               VOLT, STAB, AMP and Hz can be set with trimmers (default)

    50/60Hz through a “jumper” (default)


    Specific References

    Be the first to ask a question about this product!

    Question about the product

    * Required fields

    Voltage Regulator Mecc Alte DSR

    Save 5%